Cadeau SMAG

• Sliding dovetail design balances front- or back-heavy equipment.
• Stops and safety latch prevent accidental sliding.
• Includes 8 × 1/4″-20 and 3 × 3/8″-16 mounting threads.
• Constructed from CNC-machined aluminum with Teflon coating.

• Thin 90-degree male to male BNC cable with a 2.5 mm outer diameter.
• Supports transfer of serial data and video signals with 75 ohm impedance.
• Operates at frequencies from DC to 1 GHz with a maximum VSWR of 1.2.
• Compatible with HD cameras, gimbals, monitors, EVF, antennas, and SDI Wireless TX/RX sets.

• Designed for Canon C80 camera.
• Includes NATO compatible mounting bracket.
• Multiple 1/4-20 and 3/8-16 screw holes with ARRI standard mounts.
• Lightweight CNC machined aluminum construction.

• Thin 90-degree male to male BNC cable with 12-inch length.
• Supports transfer of serial data and video signals.
• Impedance of 75 ohms and frequency range from DC to 1 GHz.
• Cable diameter is 2.5 mm, suitable for SDI equipment.

• Thin 90-degree male to male BNC cable with 12-inch length.
• Supports transfer of serial data and video signals.
• Impedance rated at 75 ohms with frequency range DC to 1 GHz.
• Designed for SDI equipment including HD cameras, monitors, and wireless transmitters.

• Unique two-sided pouch offering extensive storage options.
• Deep side designed for chargers, adapters, and lavalier microphones.
• Shallow organizer side equipped with elastic loops for cables and smaller items.
• Two zippers provide quick and easy access to compartments.

• Power cable designed for Canon C80 camera.
• Coiled D-Tap to 5.5 x 2.5 mm barrel connector cable.
• Right-angle connector for organized cable management.
• Operates within 11 to 24 VDC voltage range.

• Camera cage with top handle designed for Canon EOS C80.
• Includes a top plate with NATO side arm for accessory attachment.
• Features HDMI lock on the side of the cage for cable security.
• Constructed from CNC aluminum for durability and lightweight.

• Camera cage specifically designed for Canon EOS C80.
• Includes a top plate with a NATO side arm for accessory attachment.
• Features HDMI lock and multiple threaded holes for accessories.
• Constructed from CNC machined aluminum for durability.

• Cage with 15mm LWS baseplate designed for Canon EOS C80.
• Includes top plate with NATO side arm and multiple ARRI anti-rotating threaded holes.
• Features HDMI cable lock on cage side.
• Made of CNC machined aluminum for durability.

• Coiled cable with LANC 3.5 mm male and female connectors.
• 10 inches long when coiled, approximately 20 inches when extended.
• Designed to connect SHAPE remote extension handle to Sony FX6.
• Right angle male connector enhances connection reliability.

• Turtle Base C-Stand features a removable junior to baby pin adapter.
• Constructed from black steel with fold-flat legs and removable rubber feet.
• Stands 16 inches (40 cm) tall, suitable for low height lights and adapters.
• Designed to nest efficiently with other turtle base C-stands.

• Lightweight ARRI-style Dovetail shoulder mount compatible with 15mm LWS, 15mm Studio, and 19mm Studio bridge plates.
• Features adjustable non-slip shoulder pad and ARRI Rosettes for handle attachment.
• Includes spring-loaded stoppers at front and back to prevent bridge plate movement.
• 12.5 inches dovetail length with 10.5 inches of top bridge plate travel.

• Designed for compact cameras with a single 15 mm rod clamp.
• Features anti-slip rubber focus knob with ARRI-standard accessory port.
• Swing arm design enables quick lens changes and alignment.
• Aluminum construction with modular, tool-free adjustments.

• V-Mount pivoting battery plate compatible with Canon EOS C400.
• Push-button system allows tilting the battery plate up and down.
• Supports hot swapping and provides easy access to rear connectors.
• Includes one D-Tap port with protective digital fuse and D-Tap to XLR4 power cable.

• Extends the clamp grip by 8 inches (20.3 cm).
• Features a zinc plated captive screw.
• Steel machined black chrome threaded section.
• Uses an M8 x 1.25 thread standard.

• Remote extension handle for Canon C400 with adjustable arm length.
• Includes male to female USB-C cable for connection.
• Features Arri rosettes for mounting on camera or baseplate.
• Push-button system allows 360-degree rotation and easy locking.

• 5/8" lockable baby pin with 3/8-16 threaded tip.
• Length of 3.5 inches (89 mm).
• Can be attached at both ends of the SHAPE Shifter jaw.
• Features an anti-rotating system to prevent twisting.

• Telescopic tripod pan handle with Sachtler rosette adapter.
• Push-button system enables fast adjustment and immediate lock.
• Telescopic arm extends up to 2 in and allows 360° rotation.
• Maximum length of 15 in and minimum length of 6 in.

• Lightweight ARRI-style dovetail shoulder mount with ARRI Rosettes for handle attachment.
• Adjustable non-slip shoulder pad with spring-loaded stoppers at the front and back.
• 12.5 inches long with 10.5 inches of top bridge plate travel.
• Includes a pair of Compact Quick Handle ARRI Rosette handles with black push buttons.

• Left and right telescopic handgrips each have 4 points of articulation and ARRI rosettes.
• Arms extend up to 2 inches and rotate 360 degrees.
• Patented push-button system allows fast adjustment and locking.
• Made of CNC machined aluminum with rubber handgrips for stability.

• 5/8 baby pin designed for use with super clamps.
• Features a hexed stud on one end and a baby pin on the other.
• Made of chrome plated steel for durability.
• Measures 3 7/8 inches (9.8 cm) in length.

• High-quality 90-degree Male BNC to 90-degree Male BNC shielded cable.
• Designed to record and transfer video signals including 12G 4K ProRes raw.
• Cable length is 24 inches (60.96 cm) with a thin gauge outer diameter of 0.159 inches.
• Impedance of 75 ohms and frequency range from DC to 12 GHz.

• 20" stainless steel arm designed for C-Stands and light stands.
• Features 5/8" diameter bar.
• Measures 22" (51 cm) in length.
• Includes anti-slip studs with 1/4-20 and 3/8-16 threading.