Cadeau SMAG

• Provides support for long lenses to relieve pressure on the camera's lens mount.
• Compatible with any standard 15 mm rods system.
• Features a vertically adjustable bracket for different lens diameters.
• Includes a sliding rod block with a thumbscrew for tightening to 15 mm rods.

• Designed for 24-inch monitors.
• Provides three-sided glare protection.
• Attaches with included Velcro® type strips.
• Made of resilient polyester with sturdy internal panels.

• Gold Mount pivoting battery plate compatible with Canon C80 top plate.
• Push-button system allows tilting the battery plate up and down for easy access.
• Includes 2 D-Tap ports and a protective digital fuse.
• Made of CNC machined aluminum for durability.

• Lens support adapter for Channel Baseplates.
• Compatible with DJI Ronin RS Series lower quick-release plates.
• Includes three stainless steel support rods with 1/4-20 threading in different lengths.
• Base made of CNC machined aluminum with M4 screws for attachment.

• Left telescopic handgrip with ARRI rosettes for camera or camera support attachment.
• Arm features four points of articulation including two push-button joints and two ratchet knobs.
• Arm extends up to 2 inches and rotates 360 degrees with position markings for recall.
• Rubber handgrips provide stability and precision; made of CNC machined aluminum.

• Single red knob enables fast and easy adjustment with two points of articulation.
• Ergonomic handle features rubber handgrips for stability and precision.
• Patented push-button system allows 360-degree rotation of the handle.
• Constructed with CNC machined parts and hard anodized aluminum for durability.

• Coiled LANC cable with male connectors on both ends.
• 11 inches long when coiled and approximately 20 inches when extended.
• Designed to connect SHAPE Remote Extension Handle to Blackmagic Ursa Mini.
• Compatible with cameras featuring 2.5 mm LANC male connectors.

• LANC coiled cable with male and female 2.5 mm connectors.
• Designed to plug the SHAPE Remote Extension Handle.
• 10 inches long when coiled and approximately 20 inches when extended.
• Right angle male connector included.

• Top handle with multiple threaded holes for attaching camera accessories.
• Handgrip made of Canadian maple for ergonomics, comfort, and security.
• Anodized parts protect against wear and oxidation.
• Constructed of CNC aluminum for durability.

• Designed to fit 5-inch Atomos Ninja V and V+ monitors.
• Made from lightweight CNC-machined aluminum.
• Features 1/4-20 screw with anti-rotation blocks for secure attachment.
• Includes 1/4-20 threads and a cold shoe mount for accessories.

• Jackscrew designed for follow focus markers.
• Compatible with SHAPE follow focus systems.
• Constructed with CNC machined parts.
• Dimensions are 1.75 × 0.13 × 0.13 inches.

• Hot Swap V-Mount Power Box Battery with 14.4V and 36Wh capacity.
• Designed for uninterrupted power supply during battery switch.
• Includes two Twist D-Tap and two LEMO 2-pin output ports.
• Features 3-color LED indicator for internal battery level.

• Adapter plate designed to fit the Sony FX9 top plate.
• Features 18 1/4-20 threaded holes for versatile mounting options.
• Constructed from thin, lightweight CNC aluminum.
• Enables mounting or replacement of the top handle on the Sony PXW-FX9 camera.

• Features one HDMI connector and one Micro-HDMI connector.
• Cable length is 5 feet (150.5 cm).
• Compatible with Sony a7S camera's cable protector.
• Designed for high-speed HDMI transmission.

• Rod bloc fits 15 mm lightweight to 19 mm studio rods.
• Left and right telescopic handgrips with ARRI rosettes.
• Each arm has 4 points of articulation and extends up to 2 inches with 360° rotation.
• Includes patented push-button system for fast adjustment and shock-resistant case.

• Locks and protects HDMI in/out cables on Atomos Ninja V and V+ monitors.
• Features adjustable brackets to fit different HDMI cable sizes.
• Made from lightweight CNC-machined aluminum.
• Includes two captive thumbscrews for cable security.

• Designed to fit the 5-inch Atomos Ninja V and Ninja V+ monitors.
• Includes a top plate with 1/4-20 and cold shoe mounts.
• Locks and protects HDMI input and output cables.
• Allows access to the SSD drive and includes three captive screws.

• HDMI to mini HDMI male coiled cable supporting 4K resolution at 60 fps.
• Die-cast HDMI (Type-C) connector provides a stable connection.
• Coiled design reduces cable clutter and extends from 16 to 32 inches.
• Supports HDMI 2.0 with 18Gbps data transfer speed, 3840×2160 resolution at 60Hz.

• Pivoting battery plate compatible with Shogun 7 and Shinobi 7 monitor cages.
• Push-button system allows tilting the battery plate up and down.
• Provides easy access to the rear connector of the monitor.
• Includes a universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes.

• Designed to match the RED® KOMODO™ & KOMODO™ 6K Production pack optical center with or without the expander module.
• Includes a quick handle with Rod Bloc and Push-button System plus a padded shoulder pad for comfort.
• Features a 15 mm LW Baseplate system with adapter plate and sliding dovetail for RED® KOMODO™ camera.
• Top handle made of CNC aluminum and Canadian maple with a tilting bracket for mounting accessories up to 4.4 lb.

• Pivoting battery plate compatible only with Canon C70 top plate (C70TP).
• Includes one SHAPE 14.4V D-Tap power cable for powering accessories.
• Push-button system allows tilting the battery plate up and down for easy access.
• Made of CNC aluminum with multiple threaded holes on top and side cheeseplate.

• Hot Swap Gold Mount battery designed for uninterrupted power supply.
• Rechargeable Li-Ion battery compatible with Gold Mount chargers and D-Tap charging.
• Includes two Twist D-Tap and two LEMO 2-pin ports for accessory power.
• 3-color LED indicator shows internal battery level with 2-year limited warranty.

• Three-piece cage kit with L-shaped top handle for RED KOMODO and KOMODO 6K Production Pack cameras.
• Top handle made of CNC aluminum and Canadian maple with Push-Button Technology for 360-degree rotation.
• Includes 15 mm lightweight baseplate, adapter plate, dovetail spacer, and 15 mm LW rod bloc clamps.
• Comes with SHAPE focus single rod follow focus and 2-stage 4 x 5.6 inch matte box made of CNC aluminum.

• Top plate designed for RED® KOMODO™ and KOMODO™ 6K Production Pack cameras.
• Constructed from CNC anodized aluminum for durability.
• Includes two removable 15 mm LW rod bloc clamps with ratchet system.
• Features multiple anti-rotating threaded holes (3/8-16, 1/4-20) for secure accessory mounting.